new JET® 14" Steel Frame Bandsaw is loaded with big-saw
capabilities, features and durability usually found on high-end
machines in commercial woodworking shops. It has
larger-than-average resaw and rip capacities, fully adjustable
fence, tool-less blade guide adjustment, heavy-duty blade
tensioning with quick release and rugged steel frame
"The new JET 14" Steel
Frame Bandsaw has a full 13½" of resaw height, as well as 13½" of
blade-to-frame cutting width," said Joan Duvall, JET's Director of
Product Management - Wood. "This
versatile bandsaw provides an ideal blend of high performance,
innovative features, solid construction and ease of use. It's a
smart choice for small to mid-sized woodworking shops, as well as
The JET 14" Steel
Frame Bandsaw is engineered to perform a wide range of woodcutting
tasks accurately and efficiently. Use
it to resaw and rip lumber to size, slice veneers, cut curves for
cabinetry and furniture, create intricate scrollwork and cut book
bandsaw weighs 356 lbs. Its rugged
steel frame and wide base provide rigidity for smooth, stable
operation and accurate cutting. The
saw's overall dimensions are 30"L x 26"W x 74-1/2"H.
The 14" bandsaw is
driven by a 1¾ hp, single-phase, 115/230V motor, which is prewired
for 115V service. Power is transmitted
to the drive pulley system via a durable poly-V belt, delivering a
blade speed of 3000 SFPM.
The bandsaw's 21½" x
16" cast iron table is set at 39" from the floor, and is precisely
ground to assure flatness. The table
tilts 0-45o to the right and 0-10o left,
providing support for a wide range of bevel cuts. A cast iron handwheel and large,
easy-to-read scale are used to set the desired table angle. A standard miter slot is provided to
accommodate a miter gauge (optional accessory), as well as jigs and
fixtures for specific projects.
An extruded aluminum
fence measures 18-1/4"L x 6"H and
slides on a steel guide rail. The
two-position fence can be used flat for inlays and furring strips
or upright for crown molding and other materials. The fence is fully adjustable with a
laser-etched scale and micro-adjust feature.
Cast iron, nine-spoke,
upper and lower blade wheels are precisely machined and computer
balanced to reduce vibration and ensure accurate blade
tracking. They feature shallow crowns
and polyurethane tires. The wheels
accommodate 125"-long blades, ranging from 1/8" to 3/4"
The JET 14" bandsaw
enables precise blade tension adjustments by turning a handwheel
and setting a tensioning scale. A handy
blade tension release is included for making blade changes and
relaxing the blade when not in use. The
blade can be easily removed from the front of the table.
A heavy-duty guide
post with rack-and-pinion adjustment provides solid blade
support. Upper and lower, ball-bearing
blade guides are independently adjustable and tool-free. The saw also is equipped with four-sided
Two 4"-diameter dust
ports are located on the back of the bandsaw below the table and at
the base. They connect with a dust
collection system and require a minimum capacity of 400 CFM.
14" Steel Frame Bandsaw is covered by a 5-year warranty, as well as
JET's RED AssuranceTM, the industry's most dependable
service and support guarantee program.
JET 14" Steel Frame Bandsaw (#714500, $1,899.99) is expected to be
available in August. To locate a
dealer, visit www.jettools.com.
Herramientas de mano
Sistemas de elevación
Bodegas y área de carga
Servicio y asistencia técnica
Centro de Atención al Cliente
Preguntas más frecuentes
Centro de servicio técnico
Tienda de piezas de repuesto
Nuevos Productos y Ofertas
Sala de Prensa
Las ventajas de JET
Empleos y carreras
Sé el primero en conocer los nuevos productos, eventos y ofertas especiales.
We would like to point out that there is another country page for your country ()
Do you wish to continue to the () site version?