Stay Connected
Be the first to know about new products, events and special offers.

JWS-25CS, 3HP Shaper, 1Ph 230V Only, 1/2"and 3/4" Spindles, 25"x25" Table


If you're looking for a space-saving shaper for your shop, the new JET JWS-25CS Shaper is what you need. This compact powerhouse features a 8000 and 10000 RPM reversing 3HP motor. The large 25" by 25" precision ground cast iron table provides a large, durable, work area. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independent left and right fences feature micro-adjustment, and a built in 4” dust port. If you feel you just don’t have the space, the nominal 23" x 25" footprint of this workhorse is sure to change your mind. Put the new JET JWS-25CS Shaper in your shop today, you'll know why JET products are "Built Better to Build Better."
Find Dealer >> 708322
  • Starting Pins for irregular shaping
  • Forward/reverse switch for left and right hand operation
  • Two-speed step pulley drive lets you select the best speed and torque for different cutter diameters
  • Independent left and right fences feature micro-adjustment and have zero-clearance capability
  • Extra-large handwheel is conveniently located for fast, easy and accurate spindle height adjustments
  • Positive detent spindle lock allows safer, easy cutter set-up
  • 4" dust port connects to your collection system to keep your workplace dust and debris-free
  • Fully enclosed, heavy-duty steel stand has a removable cover for easy motor access
  • 1/2" and 3/4" interchangeable spindles and router bit collets for use with shaper cutter and router bits
  • Unique ratcheting style levers allow you to micro-adjust your fence assembly to your exact needs
  • Powerful 3HP motor and heavy-duty magnetic controls deliver smooth, consistent power on even the heaviest jobs
  • 25" x 18" solid cast iron table comes with an additional 25" x 7" extension wings to handle extra large work pieces
  • Four adjustable work hold-downs to secure your work while shaping

Show More

Spindle Speed (RPM)8000/10000
Maximum Spindle Diameter (In.)1/2, 3/4
Spindles Included1/4" & 1/2"
Spindle Size Under Nut (In.)1/2 (2-3/4), 3/4 (3)
Spindle Travel (In.)3
Router Bit Collet Included1/4, 3/8, 1/2
Table Opening Diameter (In.)6-7/8
Table Insert Opening Diameter (In.)1-5/8, 3-1/2
Table Size (L x W) (In.)25 x 25
Table T-Slot (In.)3/4 x 3/8
Table Height from Floor (In.)34
Fence Size (L x H) (In.)9-1/2 x 2-3/4
Dust Port Outside Diameter (In.)4
Dust Collection Minimum CFM Required (CFM)600
Electrical Controlsyes
Motor Power (HP)3
Motor Phase (PH)1
Motor Voltage (V.)230
Prewired Voltage (V.)230
Motor Amps16
Recommended Circuit Size (Amps.)30

Show More