Stay Connected
Be the first to know about new products, events and special offers.

JWTS-10, 1-1/2HP Workshop Tablesaw


The JWTS-10 Workshop tablesaw is ideal for big jobs in a small area. The 1.5 HP maxi-torque motor powers the 10" blade with an exclusive double drive power system that transfers more power to the arbor than the conventional belt drive tablesaw.
Find Dealer >> 708100
  • Surface ground cast iron table with miter slots and beveled edge provides a sturdy, flat work surface
  • Steel extension wings increase your work area for larger work pieces
  • See through blade guard with splitter and anti-kickback pawls helps protect operator while giving a clear view of the material being cut
  • 1-1/2HP maxi-torque 115V/230V motor prewired for 115V operation
  • Exclusive double-drive power system transfers more power to the arbor than conventional belt-drive systems
  • One-piece trunnion design offers increased strength and rigidity for more accurate cutting
  • Miter gauge with positive stops for accurate cross-cutting and mitering
  • Horizontally braced steel leg stand adds strength and stability to the saw
  • Left tilting for more controlled bevel cutting
  • Shrouded Blade increases dust collection efficiency
  • 10" Blade included

Show More

Style (Type)Contractor
Blade Diameter (In.)10
Arbor Diameter (In.)5/8
Arbor Speed (RPM)3,600
Maximum Depth of Cut (In.)3-1/8
Maximum Depth of Cut at 45 Degrees (In.)2-1/8
Maximum Rip Left of Blade (In.)12
Maximum Rip Right of Blade (In.)30
Table in Front of Saw Blade at Maximum Depth of Cut (In.)10-1/2
Maximum Diameter of Dado (In.)8
Maximum Width of Dado (In.)13/16
Table Size (L x W) (In.)20 x 27
Table Size with Extension (L x W) (In.)27 x 44
Dust Collection Minimum CFM Required (CFM)350
Dust Port Outside Diameter (In.)2-1/2
Motor Power (HP)1-1/2
Motor Phase1
Motor Voltage (V.)115, 230
Motor Current (Amps.)12 / 6
Prewired Voltage (V.)115

Show More