Product Details
Engineered for shops that value uptime and precision, the JET GH-26130ZH 26x130 Large Spindle Bore ZH Industrial Gear Head Lathe pairs a 26" swing capacity with a heavy geared-head drivetrain for consistent, repeatable cuts.
Long workpieces are no problem: the GH-26130ZH offers 132" between centers alongside a 4-1/2" spindle bore for feeding larger-diameter bar stock straight through the headstock.
A 15 HP, Three-Phase motor drives the geared head through 12 spindle speeds (10-1000 RPM), giving operators the torque and range needed for roughing, finishing, and threading in one machine.
As configured here, the GH-26130ZH includes a Acu-Rite 303 digital readout for precise, at-a-glance positioning that reduces reliance on manual dial counting.
Standard industrial safety features include:
- Electronic chuck key holder to reduce the risk of a key left in the chuck
- Foot brake for rapid spindle stopping
- Chuck guard at the point of operation
- Full-length splash guard
- Lead screw cover to keep debris out of the drive mechanism
- Integrated coolant system
This machine ships only after inspection and is protected by JET's 2-year parts and labor warranty, giving shops long-term reliability and nationwide service support.
The GH-26130ZH is well suited for large-diameter roll and shaft turning, power generation and energy contractors, and heavy industrial fabrication.
OPTIONAL ACCESSORIES
- Collet Closer (Optional)
- Taper Attachment Kit (Optional)
Features
- Enclosed Gearbox Design — Smooth, quiet operation with reduced maintenance versus open belt-drive lathes.
- 26" Swing Capacity — Handles larger-diameter workpieces than comparable industrial lathes without sacrificing stability.
- 132" Between Centers — Machine longer shafts and cylindrical parts in a single setup to improve alignment and cut rework.
- Integrated Coolant System & Splash Guard — Contains chips and coolant for a cleaner, safer work area.
- JET Electronic Chuck Key Holder — Reduces the risk of an operator starting the spindle with the chuck key still engaged.
- Acu-Rite 303 Digital Readout — Provides real-time positional feedback to cut setup time and reduce scrap.
- Pre-Shipment Inspection — Every unit is checked for proper setup and function before it leaves the factory.
- 4-1/2" Spindle Bore — Pass larger stock directly through the headstock, reducing re-chucking and secondary operations.
Specifications
- SKUJT1-3324
- Assembled Dimensions187 x 41 x 52 in.
- Centerline of Spindle to Floor13 in.
- Collet CloserNo
- Digital ReadoutAcu-Rite 303
- Distance Between Centers132 in.
- Drive TypeGeared Head
- Length of Gap7.5 in.
- Maximum Tool Size5/8 x 5/8 in.
- Modular Pitch Threads Number18
- Modular Pitch Threads Range0.3-3.5
- Number of Inch Threads45
- Number of Longitudal And Cross Feed Rates40/40
- Number of Metric Threads39
- Number of Spindle Speeds12
- Product TypeMachines
- Prop 65Cancer and Reproductive Harm
- Range Of Cross Feeds0.001 - 0.0094 in.
- Range Of Inch Threads Tpi2 - 56 TPI
- Range Of Longitudal Feeds in/rev0.002 - 0.032 in.
- Range Of Spindle Speeds10 - 1000 RPM
- Range of Metric Threads0.5 - 14 mm
- SAP Gross Weight8598
- SAP Net weight7937
- Size26 x 130 in.
- Spindle Bore4-1/2 in.
- Spindle MountD1-11
- Spindle TaperMT7
- Spindle Taper with SleeveMT5
- Style TypeEngine - Large Spindle Bore
- Swing Over Bed26 in.
- Swing Through Gap35 in.
- Tailstock Spindle Travel6.5 in.
- Taper in Tailstock SpindleMT5
- UPC019907009672
- WarrantyTwo Years
- Width Of Bed15.75 in.
- Motor HP15 HP
- Motor PhaseThree
- Motor Voltage230/460 V
Support
Service & Support
Assistance for a smooth shopping experience
Operation Manuals
Learn the machine's application and limitations
Product Registration
Register your product to get fully warranty benefits
Warranty
Learn more about what is covered by our warranties
Reviews
This product has not been reviewed yet.
Write a Review
* - indicates required fields.
